//How to Prepare Your Car for a Mobile Roadworthy Inspection?//

You may need a roadworthy certificate for multiple reasons. But the real question is how to crack the inspection with flying colours on the first try. People look for this because a re-inspection causes money and delays. Here, we have created a blog post telling all the tips and tricks to help you pass the mobile roadworthy inspection without any trouble. If you read this blog, you will know how to prepare for roadworthy inspection correctly.

• Cleaning:

Regarding how to prepare car for inspection, we have repeatedly seen that a clean vehicle grabs many eyeballs. So, it is evident that the same rule applies in the case of a roadworthy inspection. While cleaning the exterior and interior of a vehicle is quite apparent, engine cleaning can earn you some extra brownie points. This makes it easier for the roadworthy inspector of a reputable company like Roadworthy Today to inspect the fluid levels. They can spot any leaks if the engine is already sparkly clean. You must be careful with water around electrical components if you are new. You must wash the car's exterior properly so that no dust is present before the inspection. The taillights, indicators, headlights, and reflectors should be crystal clear. If there is any rubbish inside the vehicle, take it out. Clean the clutter in the car. If you opt for vacuuming inside your vehicle, that will be extra helpful for the inspector while trying the pedals. Please go through our blog about How long does it take to get a roadworthy certificates? for more details.

• Light Checking:

For any vehicle to operate safely, lights are incredibly crucial. It comes under the car roadworthy requirements. You need to check the following lights, both on and off, to be absolutely sure:

1. Both the taillights.
2. Press the brake pedal and check whether it is working.
3. You must check both left and right indicators for working conditions.
4. You must turn on all hazard lights and inspect the indicator lights together. You can check our prior posted blog on 10 common roadworthy inspection failures.
5. There is a small light placed near the number plate for nighttime visibility. You must check that, too.
6. You must see whether the headlights are working, both high and low beams.

• Tyres:

In the official vehicle inspection checklist, a tyre check is a must. You must ensure your vehicle’s tyre depth remains within the standard legal depth. While checking that, you must scrutinise the entire tyre width. If you find any cuts, cracks, embedded objects, or bulges in the tyre, remove and fix them. You must ensure that the tyre pressure is adequate for a safe ride. To pass the roadworthy inspection with flying colours, you should make sure that your spare tyre is inflated and securely mounted. Before the Sunshine Coast roadworthy inspection, keep your working jack and wheel brace ready in your vehicle’s emergency kit. Having an emergency kit prepared adds good reputation to your roadworthy inspection process.

• Brakes:

We all know that brakes are a vital part of a vehicle. So, during a Mobile Roadworthy Sunshine Coast inspection, the brake fluid level is checked. You must ensure that the brake level in the reservoir is within the minimum and maximum marks. The brake pedal must go all the way. If it feels spongy, the air system has a leak or trouble. While checking the handbrake, make sure that it moves smoothly. If you have bad feelings about the brakes, you should get them examined by a professional mechanic before the mobile vehicle inspection.

• Windscreen & Wipers:

A windscreen must be clean and clear at all times. It should not have any damage, cracks, or chips. This is very vital, especially for the driver’s line of sight. Wiper blades should work swiftly. If worn out, they need to be replaced immediately before the inspection. As a part of vehicle inspection preparation, you should always make sure that the washer fluid reservoir is full.

• Steering & Suspension:

The roadworthy inspector will check the steering and suspension. When you wonder how to pass roadworthy inspection, a working steering and suspension are part of it. So, before the mobile roadworthy certificate inspection, you must inspect yourself to see whether it feels too tight or loose, and if there is any unusual noise. While at it, you should try to push down on each corner of the suspension as part of a check. If the suspension bounces vigorously after you let it go, it can be due to worn shock absorbers. Also, check for clunking noises while your car rides over bumpy roads.

• Seatbelts:

You should pull your seatbelt to its full extension to ensure it works fine. Any cuts or damage can risk your safety in the future. A responsible mobile car inspection services provider will fail you in the inspection if the seatbelt is not functioning smoothly. You should also check each buckle to ensure it secures and releases easily.

• Fluid Checks:

You should regularly check the fluid level under the bonnet. This is not just for roadworthy inspection tips, but also for the overall functioning of your vehicle. When the engine is cold, you should check the flat surface. You should be mindful that the coolant is between the minimum and maximum marks. You should check that the power steering fluid is at a sufficient level. If the vehicle has been parked for a long time, check that there are no leaks. Take your time and kindly go through our blog on What you need to check while booking a roadworthy inspection?

We have mentioned all the necessary tips to help you prepare for roadworthy inspection. A roadworthy inspection is designed to ensure that safety is intact. If you find anything broken or unusable while preparing for the inspection, it is better to fix it.We hope we have provided all the tips and tricks to help you pass the mobile roadworthy inspection on the first try.